Sirion 405 puls
Sample image, your configuration may differ.
Description
- Multiprocess MIG/MAG pulse welding machine, decompact, modular
-
No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works
- 72 characteristics (JOBs) including EWM forceArc®* / forceArc® puls*, EWM rootArc®* / rootArc® puls* (forceArc®* / forceArc® puls* for the steel application area only)
- Synergic characteristics for MIG/MAG standard or pulsed welding for steel/CrNi/aluminium
- Synergic characteristics for flux-cored wires
- Non Synergic operation for manual setting of welding parameters
- Also suitable for MMA welding, TIG welding and gouging
- Individually configurable programs for JOBs (welding tasks)
- Adjustable start and end-crater functions
- Infinitely adjustable arc dynamics (choke effect)
- Your benefits
- No additional mains connection required for cooling unit. Module power supply via welding machine
- Energy-saving thanks to high efficiency and standby function
- Best suited for use with long hose packages
- Easy, tool-free change of welding polarity
- IP23 spray water protected
Control
OW Cover
- No controls on the welding machine.
- The machine is controlled exclusively via the selected wire feeder.
| Operation mode | The machine is controlled via the selected wire feeder. |
Technical data
| Version | Sirion 405 puls |
| Setting range for welding current | 5 A - 400 A |
| Duty cycle 40 °C | 400 A / 60 % |
| 350 A / 100 % | |
| Open circuit voltage | 82 V |
| Mains voltage (ex works) | 3 x 380 V - 400 V |
| Mains voltage (possible) | 3 x 440 V - 480 V |
| Mains tolerances (ex works) | -25 % up to +20 % |
| Mains frequency | 50 Hz / 60 Hz |
| Recommended generator power | 23.2 kVA |
| Efficiency | 89 % |
| Power consumption Pi | 23 W |
| Protection classification | IP23 |
| Test mark | |
| EMC class | A |
| Dimensions (L x B x H) | 625 mm x 298 mm x 531 mm |
| 24.6 inch x 11.7 inch x 20.9 inch | |
| Weight | 39.4 kg / 86.9 lbs |
| Standards | IEC 60974-1 and -10 CL.A |
Note
- The mains voltage can be adapted by connecting a plug with a different operating voltage. The voltage may only be adjusted by a qualified electrician in accordance with the respective national legislation and regulations.
Documents
Accessories
Show all
Components and accessories
Xnet Welding Management System
