T4.02
Sample image, your configuration may differ.
Description
- One-knob operation
- Welding sequence selection and parameter setting using click wheel or conventional operation with sequence buttons (back/forward)
- Expert menu for advanced welding parameter settings
- Welding sequence parameter setting
- Start, welding, secondary and end current
- Up-slope/down-slope time
- Gas pre- and post-flow time
- Electrode diameter
- Welding sequence parameters set with LED user guidance
- Start, welding, secondary and end current
- Pulse time and pulse pause time with corresponding slope times
- Up-slope/down-slope time
- Gas pre- and post-flow time
- Electrode diameter
Technical data
| Welding process | TIG |
| activArc | |
| spotArc | |
| spotmatic | |
| TIG AC | |
| MMA | |
| Operating modes | Non-latched |
| Latched | |
| AC functions | AC special |
| AC tungsten balling | |
| AC sine | |
| AC trapezoidal | |
| AC rectangle | |
| AC balance | |
| AC frequency: 50 Hz to 200 Hz | |
| Automatic AC frequency | |
| Ignition options | HF |
| Liftarc | |
| Pulse type | Average value pulsing |
| kHz pulsing | |
| Pulse frequency | |
| Seconds pulse | |
| Parameters in display | Welding current |
| Welding voltage | |
| Welding parameters | |
| Welding power | |
| JOB number | |
| Number of freely definable JOBs | 8 |
| Functions | Gas test, purging |
| Up-slope/down-slope | |
| MMA functions | Hotstart |
| Arcforce | |
| Antistick | |
| AC electrode welding | |
| Average value pulsing | |
| Frequency pulse welding |
