View shopping cart
0 Products  
0,00 €    

0save cart

View wish list
0 Products  

0add wishlist

Go to product comparison
0 Products  

0add compare

TIG welding machines

tigSpeed continuous drive 45 hotwire

Sample image, your configuration may differ.

Description

  • TIG cold/hot wire feeder
  • Constant wire feed and TIG Superpuls
  • To find out more about our high-tech TIG arcs, please click on TIG-Process TIG_PROCESS.EPS
  • High process reliability and much easier handling compared to manual TIG welding
  • Areas of application: Low-, medium- and high-alloy materials; CrNi; nickel-based alloys, copper and copper alloys; aluminium and aluminium alloys (only cold wire); P91/P92 special alloys
  • Suitable for mobile use thanks to optional trolley
  • Strain relief and intermediate hose package bracket to protect the intermediate hose package available as an option
  • Operating point adjustment via remote control directly at the workstation
  • Can be used with any TIG welding machine
  • Workpiece lead to connect the hot wire current is included in the supply package
  • TIG cold wire welding:
    • Up to 60% faster welding speeds compared to manual TIG welding
  • TIG hot wire welding:
    • The welding speed is significantly increased even more compared to cold wire welding.
    • Huge advantages for cladding thanks to reduced dilution in the weld pool as a result of targeted heat input
  • Constant wire feeding:
    • Ideal for mechanised/automated applications and TIG cladding
    • Less distortion thanks to reduced heat input
    • Smooth, uniform seam finish
  • Superpuls with two wire feed speeds:
    • Continual switch between two wire feed speeds
  • Superpuls “start/stop”:
    • Continual switch between wire feeding and wire stop
    • Particularly suitable for PA, PB and PC position
  • Superpuls “reverse”:
    • Continual switch between wire feeding and wire return
    • Optimally suitable for positional welding and thin sheet processing

Control

tigSpeed T3.80

tigSpeed T3.80 - Parameter readout and setting of absolute values on the digital displays – repeat-accurate and reproducible (m/min or Ipm)  
  • Parameter readout and setting of absolute values on the digital displays – repeat-accurate and reproducible (m/min or Ipm)
  • 15 individually definable welding programs can be saved
Welding processtigSpeed continuous
tigSpeed oscillation
tigSpeed Superpuls
Availability of welding procedures may vary depending on the machine type!
Operating modesManual non-latched
Manual latched
Automatic non-latched
Automatic latched
Ignition optionsHF
Liftarc
Parameters in displayWire feed speed
Forward/backward motion in hertz
Program number

Technical data

Setting range for welding current40 A - 180 A
Duty cycle 40 °C180 A / 35 %
150 A / 60 %
130 A / 100 %
Mains voltage (ex works)1 x 230 V
Mains tolerances (ex works)-40 % up to +15 %
Mains frequency50 Hz / 60 Hz
Efficiency86 %
Wire feed speed0.3 m/min - 15 m/min
11.811 ipm - 590.552 ipm
Factory-installed roll equipment1,0 + 1,2 mm / Steel
Spool diameterD200/D300
Protection classificationIP23
Test mark
EMC classA
Dimensions (L x B x H)625 mm x 377 mm x 531 mm
24.6 inch x 14.8 inch x 20.9 inch
Weight30 kg / 66.1 lbs
StandardsIEC 60974-1, -5 and -10 CL.A

Documents

Accessories

Show all
Components and accessories
Welding torches
An error occurred
Successfully completed
current mapping: product