tigSpeed oscillation drive 45 hotwire
Sample image, your configuration may differ.
Description
- TIG cold/hot wire feeder
- Constant wire feed, oscillating wire feed and TIG superPuls
- To find out more about our high-tech TIG arcs, please click on TIG-Process
- High process reliability and much easier handling compared to manual TIG welding
- Areas of application: Low-, medium- and high-alloy materials; CrNi; nickel-based alloys, copper and copper alloys; aluminium and aluminium alloys (only cold wire); P91/P92 special alloys
- Suitable for mobile use thanks to optional trolley
- Strain relief and intermediate hose package bracket to protect the intermediate hose package available as an option
- Operating point adjustment via remote control directly at the workstation
- Can be used with any TIG welding machine
- Workpiece lead to connect the hot wire current is included in the supply package
- TIG cold wire welding:
- Up to 60% faster welding speeds compared to manual TIG welding
- TIG hot wire welding:
- The welding speed is significantly increased even more compared to cold wire welding.
- Huge advantages for cladding thanks to reduced dilution in the weld pool as a result of targeted heat input
- Constant wire feeding:
- Ideal for mechanised/automated applications and TIG cladding
- Less distortion thanks to reduced heat input
- Smooth, uniform seam finish
- Oscillating wire feeding:
- The wire is fed continuously, at the same time the wire is moved forwards and backwards at a freely adjustable frequency (1-16 Hz)
- Easy handling, even for positional welding
- Highly stable process: the arc remains stable when the gap between the electrode and workpiece changes
- Excellent sidewall fusion
- Reduces risk of undercuts
- Fine-flaked weld surface
- Filler and cover passes
- Optimum results with high-alloy materials
- Superpuls with two wire feed speeds:
- Continual switch between two wire feed speeds
- Superpuls “start/stop”:
- Continual switch between wire feeding and wire stop
- Particularly suitable for PA, PB and PC position
- Superpuls “reverse”:
- Continual switch between wire feeding and wire return
- Optimally suitable for positional welding and thin sheet processing
Control
tigSpeed T3.80
- Parameter readout and setting of absolute values on the digital displays – repeat-accurate and reproducible (m/min or Ipm)
- 15 individually definable welding programs can be saved
| Welding process | tigSpeed continuous |
| tigSpeed oscillation | |
| tigSpeed Superpuls | |
| Availability of welding procedures may vary depending on the machine type! | |
| Operating modes | Manual non-latched |
| Manual latched | |
| Automatic non-latched | |
| Automatic latched | |
| Ignition options | HF |
| Liftarc | |
| Parameters in display | Wire feed speed |
| Forward/backward motion in hertz | |
| Program number |
Technical data
| Setting range for welding current | 40 A - 180 A |
| Duty cycle 40 °C | 180 A / 35 % |
| 150 A / 60 % | |
| 130 A / 100 % | |
| Mains voltage (ex works) | 1 x 230 V |
| Mains tolerances (ex works) | -40 % up to +15 % |
| Mains frequency | 50 Hz / 60 Hz |
| Efficiency | 86 % |
| Wire feed speed | 0.3 m/min - 15 m/min |
| 11.811 ipm - 590.552 ipm | |
| Factory-installed roll equipment | 1,0 + 1,2 mm / Steel |
| Spool diameter | D200/D300 |
| Protection classification | IP23 |
| Test mark | |
| EMC class | A |
| Dimensions (L x B x H) | 625 mm x 377 mm x 531 mm |
| 24.6 inch x 14.8 inch x 20.9 inch | |
| Weight | 32.4 kg / 71.4 lbs |
| Standards | IEC 60974-1, -5 and -10 CL.A |
Documents
Accessories
Show all
Components and accessories
Welding torches
