Inotec BP 2 kg
Description
- Pickling paste for removal of discolouration around weld seams and heat-affected zones
- A clean metallic surface is achieved in the application zone
- Weld seams and heat-affected zones must be allowed to cool before treatment
- Flush with water under high pressure (min. 140 bar)
Note
- Contains hydrofluoric acid and nitric acid
- Disposal regulations must be observed; do not discharge into any waterway, sewer or drain
Technical data
Yield | Approx. 50–80 linear metres weld seam and run-on zone per kg |
Application | Use etching brush to amply apply product to the surface to be treated |
Reaction time | 30 min - 120 min |
Finishing treatment | InoTec passivating agent for immediate formation of the passive layer |
Weight | 2 kg |
Packing drum | PE can |
UN number | 2922 |