B10 ELECTRA
Sample image, your configuration may differ.
Description
- Designed for chamfering and deburring straight and shaped parts, inside and outside radii, and bores
- Edge rounding as preparation for surface treatment such as coating
- Replaceable head to determine the bevel angle
- Scale for precise adjustment of bevel width
- Electronic speed control
- The special design of the cutting head allows the wear of the indexable inserts to be reduced by half if the max. bevel width of 8 mm is not exceeded.
- Delivery includes:
- Chamfering system
- (without head)
- Tools
- Packaged in a box
- User manual
Technical data
| Weight | 6 kg |
| Material | Aluminium |
| Bevel width (hypotenuse) < 400 MPa | 10 mm |
| Bevel width (hypotenuse) > 400 MPa | 5 mm |
| Engine output | 1700 W |
| Rounding radius | 2.5 mm |
| 3.5 mm | |
| 4 mm | |
| Rotational speed | 2700 U/min - 5800 U/min |
| Bevel angle (replaceable milling machine) | 30°, 37,5°, 45°, 50°, 60° |
| Wire feed | Manually operated |
Accessories
Show all
Workshop equipment
