PM 551 W 2U/D Alu M9 3 m Ø 1,0 mm
Sample image, your configuration may differ.
Note
- Equipment as delivered for Ø 1.0 mm aluminium wire:
- Gas nozzle Ø 15 mm; 66 mm
- Gas diffuser Ø 20 mm; 26 mm
- Contact tip forced contacting M9 x 35 mm; Ø 1.0 mm and contact tip holder M9 x 35 mm
- Combined liner PA; Ø 1.5 mm x 4 mm
- Equipment as delivered for Ø 1.2 mm aluminium wire:
- Gas nozzle Ø 15 mm; 66 mm
- Gas diffuser Ø 20 mm; 26 mm
- Contact tip forced contacting M9 x 35 mm; Ø 1.2 mm and contact tip holder M9 x 35 mm
- Combined liner PA; Ø 2 mm x 4 mm
Consumables
-
1 GN TR 23 66mm D=15mmLong screw-on gas nozzle, fits MT401G and MT551W torch series 15 mm - 19 mm
15 mm 116,50 €*/138,64 €**
17 mm 117,00 €*/139,23 €**
19 mm 116,50 €*/138,64 €**
Add to cart
-
2.3 CT ZWK CuCrZr M9 x 35...Precision-manufactured contact tip made from copper/chrome/zirconium alloy 1 mm - 1.6 mm
1 mm 71,90 €*/85,56 €**
1.2 mm 71,90 €*/85,56 €**
1.6 mm 71,90 €*/85,56 €**
Add to cart
-
3 CTH CUCRZR M9 L=35MMPrecision-manufactured contact tip holder made from copper/chrome/zirconium alloy.
35 mm 73,50 €*/87,47 €**
38 mm 73,50 €*/87,47 €**
Add to cart
-
4 GD Ø14,5 mm, L=25...Screw-on gas distributor made from highly heat-resistant, fibre-reinforced plastic
GD Ø14,5 mm, L=25... 42,80 €*/50,93 €**
Add to cart
-
- LPA COMBI 2.0mm x...Liner (combined liner) for feeding CrNi, aluminium, flux cored wires and CuSi wires Colour code: Grey Wire Ø: 1.2...
3 m 25,80 €*/30,70 €**
4 m 28,40 €*/33,80 €**
5 m 31,10 €*/37,01 €**
Add to cart
-
- LPA COMBI 1.4mm x...Liner (combined liner) for feeding CrNi, aluminium, flux cored wires and CuSi wires Colour code: Grey Wire Ø: 0.6...
3 m 25,80 €*/30,70 €**
4 m 28,00 €*/33,32 €**
5 m 30,00 €*/35,70 €**
Add to cart
-
- TT SW5-SW12MMTorch key for fitting contact tip, contact tip holder and other accessories
TT SW5-SW12MM 1,25 €*/1,49 €**
Add to cart
Description
- Water-cooled MIG/MAG function torch
- Automatic LED lighting when the welding torch is moved
- Ex works, equipped for welding aluminium wires
- Setting of:
- Welding current and wire feed speed
- Voltage correction
- Program and JOB selection
- Additional control cable for connection to EWM welding machines without X technology
- Recommendation:
- For feeding steel wires, we recommend using a steel liner with a capillary tube
- For feeding CrNi, aluminium, flux-cored and CuSi wires, we recommend a PA combined liner with a guide tube (alternatively you can use a Teflon or carbon Teflon liner)
Note
- The complete range of functions of PM function torches is only available when used in conjunction with MIG/MAG XQ welding machines, and depends on the connected machine. If the function torch is connected to EWM Multimatrix or Taurus Steel welding machines, the welding torch switches to compatibility mode and has limited functions. If the welding torch is connected to third-party machines or welding machines without MULTIMATRIX technology, welding is not possible.
Versions
Technical data
| Configurations | 2U/D control |
| Duty cycle CO2 | 650 A / 100 % |
| Duty cycle M21 | 550 A / 100 % |
| Duty cycle M21 Impuls | 500 A / 100 % |
| Wire Ø | 0.8 mm - 2 mm |
| Ø wire ex works | 1 mm |
| Connection poles | Euro torch connector |
| Connection | Euro torch connector |
| Hose package length | 3 m |
| Bend angle torch neck | 45 ° |
| Operating weight | 1.1 kg |
| Test mark |
Documents
Accessories
Show all
Welding torches
Workshop equipment
