PM 551 WL RD3 X M9 3 m
Note
- Equipment as supplied (steel wire Ø 1.2 mm):
- Gas nozzle Ø 17 mm; 66 mm
- Gas diffuser Ø 14.5 mm; 25 mm
- Contact tip M9 x 35 mm; Ø 1.2 mm and contact tip holder M9 x 35 mm
- Steel liner red; Ø 2 mm x 4.6 mm
Consumables
-
1 GN TR 23 66mm D=15mmLong screw-on gas nozzle, fits MT401G and MT551W torch series 15 mm - 19 mm15 mm 116,50 €*/138,64 €**
17 mm 117,00 €*/139,23 €**
19 mm 116,50 €*/138,64 €**
Add to cart
-
1 GN TR 23 63mm D=15mmShort screw-on gas nozzle, fits MT401G and MT551W torch series 15 mm - 19 mm15 mm 116,50 €*/138,64 €**
17 mm 116,50 €*/138,64 €**
19 mm 116,50 €*/138,64 €**
Add to cart
-
1.1 GN NG TR23X4 63mm...Screw-on gas nozzle for narrow gap welding; fits MT401G and MT551W torch series Nozzle Ø: 13 mm63 mm 148,50 €*/176,72 €**
66 mm 13,75 €*/16,36 €**
Add to cart
-
1.4 GN NG M12 73mmGas nozzle, narrow gap welding73 mm 76,10 €*/90,56 €**
76 mm 114,50 €*/136,26 €**
Add to cart
-
2 CT CUCRZR M9X35MM...Precision-manufactured contact tip made from copper/chrome/zirconium alloy 0.8 mm - 2.8 mm0.8 mm 27,50 €*/32,73 €**
0.9 mm 27,50 €*/32,73 €**
1 mm 27,50 €*/32,73 €**
1.2 mm 27,50 €*/32,73 €**
1.4 mm 27,50 €*/32,73 €**
1.6 mm 27,50 €*/32,73 €**
2 mm 32,00 €*/38,08 €**
2.4 mm 41,50 €*/49,39 €**
2.8 mm 122,00 €*/145,18 €**
Add to cart
-
2 CTAL E-CU M9X35MM...Precision-manufactured contact tip made from E-Cu copper 0.8 mm - 2 mm0.8 mm 27,70 €*/32,96 €**
0.9 mm 0,00 €*/0,00 €**
1 mm 27,70 €*/32,96 €**
1.2 mm 27,70 €*/32,96 €**
1.4 mm 0,00 €*/0,00 €**
1.6 mm 27,70 €*/32,96 €**
2 mm 27,70 €*/32,96 €**
Add to cart
-
2 CTAL E-CU M8X30MM...Contact tip made from E-Cu copper 0.8 mm - 2 mm0.8 mm 14,90 €*/17,73 €**
0.9 mm 14,90 €*/17,73 €**
1 mm 14,90 €*/17,73 €**
1.2 mm 19,00 €*/22,61 €**
1.4 mm 14,90 €*/17,73 €**
1.6 mm 14,90 €*/17,73 €**
2 mm 14,90 €*/17,73 €**
Add to cart
-
2 CT CUCRZR M8X30MM...Contact tip made from copper/chrome/zirconium alloy 0.8 mm - 2 mm0.8 mm 21,20 €*/25,23 €**
0.9 mm 21,20 €*/25,23 €**
1 mm 21,20 €*/25,23 €**
1.2 mm 25,00 €*/29,75 €**
1.4 mm 21,20 €*/25,23 €**
1.6 mm 21,20 €*/25,23 €**
2 mm 21,20 €*/25,23 €**
Add to cart
-
2 CT E-CU M8X30MM D=0.8MMContact tip made from E-Cu copper 0.8 mm - 2 mm0.8 mm 14,90 €*/17,73 €**
0.9 mm 14,90 €*/17,73 €**
1 mm 14,90 €*/17,73 €**
1.2 mm 19,00 €*/22,61 €**
1.4 mm 14,90 €*/17,73 €**
1.6 mm 14,90 €*/17,73 €**
2 mm 14,90 €*/17,73 €**
Add to cart
-
2.1 CT CuCrZr M9 x 100mm...Contact tip, narrow gap weldingCT CuCrZr M9 x... 0,00 €*/0,00 €**
1 mm 126,00 €*/149,94 €**
1.2 mm 133,50 €*/158,87 €**
1.6 mm 133,50 €*/158,87 €**
1.4 mm 102,00 €*/121,38 €**
Add to cart
-
2.3 CT ZWK CuCrZr M9 x 35...Precision-manufactured contact tip made from copper/chrome/zirconium alloy 1 mm - 1.6 mm1 mm 71,90 €*/85,56 €**
1.2 mm 71,90 €*/85,56 €**
1.6 mm 71,90 €*/85,56 €**
Add to cart
-
3 CTH CUCRZR M9 L=35MMPrecision-manufactured contact tip holder made from copper/chrome/zirconium alloy.35 mm 73,50 €*/87,47 €**
38 mm 73,50 €*/87,47 €**
Add to cart
-
3 CTH M8 x 35 mm, CuCrZrPrecision-manufactured contact tip holder made from copper/chrome/zirconium alloy.34.5 mm 64,50 €*/76,76 €**
37.5 mm 64,50 €*/76,76 €**
Add to cart
-
4 GD Ø14,5 mm, L=25...Screw-on gas distributor made from highly heat-resistant, fibre-reinforced plasticGD Ø14,5 mm, L=25... 42,80 €*/50,93 €**
Add to cart
-
5 IT ES M22X1,5 M12X1Insulation ring for narrow gap weldingIT ES M22X1,5 M12X1 26,85 €*/31,95 €**
Add to cart
-
6 ZH GDE ID=5MM AD=10MM...Centring sleeve, for narrow gap weldingZH GDE ID=5MM... 27,00 €*/32,13 €**
Add to cart
-
- LPTFE COMBI 1.5mm x...Liner (combined liner) for feeding CrNi, aluminium, flux cored wires and CuSi wires Colour code: Blue Wire Ø: 0.6...3 m 26,80 €*/31,89 €**
4 m 31,20 €*/37,13 €**
5 m 35,50 €*/42,25 €**
Add to cart
-
- LPTFE COMBI 2.0mm x...Liner (combined liner) for feeding CrNi, aluminium, flux cored wires and CuSi wires Colour code: Red Wire Ø: 1.2...3 m 27,10 €*/32,25 €**
4 m 30,10 €*/35,82 €**
5 m 33,30 €*/39,63 €**
Add to cart
-
- LPTFE COMBI 2.7mm x...Liner (combined liner) for feeding CrNi, aluminium, flux cored wires and CuSi wires Colour code: Yellow Wire Ø:...3 m 27,10 €*/32,25 €**
4 m 36,90 €*/43,91 €**
5 m 33,30 €*/39,63 €**
Add to cart
-
- LCPTFE COMBI 1.5mm x...Liner (combined liner) for feeding CrNi, aluminium, flux cored wires and CuSi wires Colour code: Black Wire Ø:...3 m 26,80 €*/31,89 €**
4 m 31,40 €*/37,37 €**
5 m 35,40 €*/42,13 €**
Add to cart
-
- LCPTFE COMBI 2.0mm x...Liner (combined liner) for feeding CrNi, aluminium, flux cored wires and CuSi wires Colour code: Black Wire Ø:...3 m 27,10 €*/32,25 €**
4 m 36,90 €*/43,91 €**
5 m 33,30 €*/39,63 €**
Add to cart
-
- LCPTFE COMBI 2.7mm x...Liner (combined liner) for feeding CrNi, aluminium, flux cored wires and CuSi wires Colour code: Black Wire Ø:...3 m 28,40 €*/33,80 €**
4 m 38,40 €*/45,70 €**
5 m 38,90 €*/46,29 €**
Add to cart
-
- LPA COMBI 2.0mm x...Liner (combined liner) for feeding CrNi, aluminium, flux cored wires and CuSi wires Colour code: Grey Wire Ø: 1.2...3 m 25,80 €*/30,70 €**
4 m 28,40 €*/33,80 €**
5 m 31,10 €*/37,01 €**
Add to cart
-
- LPA COMBI 1.4mm x...Liner (combined liner) for feeding CrNi, aluminium, flux cored wires and CuSi wires Colour code: Grey Wire Ø: 0.6...3 m 25,80 €*/30,70 €**
4 m 28,00 €*/33,32 €**
5 m 30,00 €*/35,70 €**
Add to cart
-
- LPA COMBI 2.3mm x...Liner (combined liner) for feeding CrNi, aluminium, flux cored wires and CuSi wires Colour code: Grey Wire Ø: 1.6...3 m 24,00 €*/28,56 €**
4 m 28,00 €*/33,32 €**
5 m 31,90 €*/37,96 €**
6 m 37,20 €*/44,27 €**
8 m 42,40 €*/50,46 €**
10 m 47,60 €*/56,64 €**
Add to cart
-
- LSTC 2.4mm x 4.6mm 3.6mSteel liner for feeding steel wire Colour code: Yellow Wire Ø: 1.6 mm - 2 mm3.6 m 11,50 €*/13,69 €**
4.6 m 12,70 €*/15,11 €**
5.6 m 6,95 €*/8,27 €**
7 m 9,17 €*/10,91 €**
Add to cart
-
- LSTC 1.5mm x 3.8mm 3.6mSteel liner for feeding steel wire Colour code: Blue Wire Ø: 0.8 mm - 1 mm3.6 m 5,15 €*/6,13 €**
4.6 m 5,70 €*/6,78 €**
5.6 m 6,20 €*/7,38 €**
7 m 9,17 €*/10,91 €**
Add to cart
-
- LSTC 2.0mm x 4.6mm 3.6mSteel liner for feeding steel wire Colour code: Red Wire Ø: 1.2 mm - 1.6 mm3.6 m 5,15 €*/6,13 €**
4.5 m 5,65 €*/6,72 €**
5.6 m 6,20 €*/7,38 €**
Add to cart
-
- SRP MT401G/MT551W AL M9Replacement parts set for PM 401 G/MT401G and PM 551 W/MT551W welding torchesSRP MT401G/MT551W... 195,00 €*/232,05 €**
Add to cart
-
- SRP MT401G/MT551W...Replacement parts set for PM 401 G/MT401G and PM 551 W/MT551W welding torchesSRP MT401G/MT551W... 205,00 €*/243,95 €**
Add to cart
-
- ON PM 551 W AC Ø1,0...Conversion kit for aluminium weldingON PM 551 W AC... 176,50 €*/210,04 €**
ON PM 551 W AC... 179,50 €*/213,61 €**
ON PM 551 W AC... 171,50 €*/204,09 €**
ON PM 551 W AC... 174,50 €*/207,66 €**
Add to cart
-
- TT SW5-SW12MMTorch key for fitting contact tip, contact tip holder and other accessoriesTT SW5-SW12MM 1,25 €*/1,49 €**
Add to cart
-
- SRP MT401G/MT551W ALU...Replacement parts set for PM 401 G/MT401G and PM 551 W/MT551W welding torchesSRP MT401G/MT551W... 195,00 €*/232,05 €**
Add to cart
-
- SRP MT401G/MT551W...Replacement parts set for PM 401 G/MT401G and PM 551 W/MT551W welding torchesSRP MT401G/MT551W... 205,00 €*/243,95 €**
Add to cart
Description
- Water-cooled MIG/MAG function torch with high-quality OLED graphic display
- Torch neck 48 mm longer compared to standard torch
- Automatic LED lighting when the welding torch is moved
- Safe and rugged; without control cable and additional connector plug
- Display and setting of:
- Welding current and wire feed speed
- Voltage correction
- Program switching
- Operating mode and welding type
- Process switching
- Interferences and error messages
- Dynamics (harder to softer arc)
- Xnet support:
- Selection of welding tasks according to welding sequence plan
- Component management
- Highlights EWM PM welding torches:
- Secure hold thanks to rubber inserts in the grip
- The flexible ball joint makes it comfortable to work, even for positional welding
- The torch trigger protection prevents the arc being ignited unintentionally
- Recommended use for 6.5 m hose packages: For steel and CrNi with a wire diameter of 1.2 to 1.6 mm only
- Recommendation:
- For feeding steel wires, we recommend using a steel liner with a capillary tube
- For feeding CrNi, aluminium, flux-cored and CuSi wires, we recommend a PA combined liner with a guide tube (alternatively you can use a Teflon or carbon Teflon liner)
Note
- The complete range of functions of PM function torches is only available when used in conjunction with MIG/MAG XQ welding machines, and depends on the connected machine. If the function torch is connected to EWM Multimatrix or Taurus Steel welding machines, the welding torch switches to compatibility mode and has limited functions. If the welding torch is connected to third-party machines or welding machines without MULTIMATRIX technology, welding is not possible.
Versions
Technical data
Configurations | RD3 X control including LED lighting |
Duty cycle CO2 | 650 A / 100 % |
Duty cycle M21 | 550 A / 100 % |
Duty cycle M21 Impuls | 500 A / 100 % |
Wire Ø | 0.8 mm - 2 mm |
Connection poles | Euro torch connector |
Connection | Euro torch connector |
Thread, contact tip | M9 |
Hose package length | 3 m |
Bend angle torch neck | 45 ° |
Operating weight | 1.16 kg |
Test mark |
Documents
Accessories
Show all
Welding torches
Workshop equipment
Control
- Welding torch controls with high-quality OLED display
- Display and setting of:
- Welding current and wire feed speed
- Voltage correction
- Program switching
- Operating mode and welding type
- Process switching
- Interferences and error messages
- Dynamics (harder to softer arc)
- Xnet support:
- Selection of welding tasks according to welding sequence plan
- Component management
- The parameter setting is divided into the main and program level. After switching on the welding machine, you are always at the main level.
Main level settings | Welding current |
Voltage correction | |
Wire feed speed | |
Process switching | |
Dynamics (harder to softer arc) | |
Program number | |
Program level setting | Welding type (standard or pulse welding) |
Operating mode (non-latched, latched etc.) | |
Xnet component management | Selection of welding tasks according to welding sequence plan |
Acknowledging runs and seams | |
Temporary exit (free welding mode) from the seam sequence |