ON PM 551 W AC Ø1,0 mm 3 m
Note
- The brass liner contained in the liner must be shortened to a length of 100 mm. More detailed information can be found in the operating instructions
Description
- Conversion kit for aluminium welding
- Complete welding torch equipment set for the low and medium power range (thin sheet metal up to approx. 6 mm), providing everything you need to start aluminium welding.
- Available in 3 m and 4 m lengths and for a welding wire diameter of 1.0 mm or 1.2 mm
- The conical gas nozzle provides a targeted gas flow, allowing for welding results with no burn marks
- The forced-contact tip ensures consistent aluminium wire contact in the contact tip to ensure high arc stability and a longer service life
- The PA liner guarantees steady reduced-friction wire feeding
- Set comprising:
- 1 x liner incl. brass liner
- 2 x contact tip holder
- 10 x forced-contact tip
- 2 x gas diffuser
- 2 x gas nozzle
- 1 x torch key for fitting contact tip, contact tip holder and other accessories
Versions
Technical data
Length | 3 m |
Wire Ø | 1 mm |
Nozzle Ø | 15 mm |
Thread, contact tip | M9 |
Accessories
Show all
Components and accessories
Suitable for
Show all
Welding torches