Tetrix XQ 400 puls DC W COMF3 5P
The price shown includes the following components:
- TIG DC pulse welding machine including all characteristics and functions, demodular
- “blueCool” coolant to -10 °C (-14 °F), 5 l, 5 l
- EWM Retox XQ TIG multi-functional welding torch with display and remote-control functions, water cooled, 4 m
- Workpiece lead with clamp, 450 A / 60 %, 70 mm²
- Gas hose, 2 m
- Pressure regulator with manometer, 15 l
- Mains plug, assembled,
Description
- Energy-saving thanks to high efficiency and standby function
- TIG DC inverter welding machine of the latest generation
- Tried-and-tested Comfort 3.0 control with two easy-to-read 7-segment displays for simple and fast selection of the most important parameters
- Welding procedures and functions
- TIG DC and TIG pulse
- activArc® and spotArc®
- MMA, MMA pulse, MMA cel, MMA cel pulse
- To find out more about our high-tech TIG arcs, please click on TIG-Process
- Your benefits
- Connection capability for remote control and function torch
- flexFit casing system: Many accessory parts and options can be fixed to the welding machine using conventional slot nuts
- LED information bar: Indicates the current operating status
- Splash-proof as per IP23
- Temperature- and speed-controlled cooling fan – reduced contamination and less noise emissions as fan only runs when needed
- Simple, tool-free reversal of the welding polarity
- Optional network connectivity with ewm Xnet software via LAN or WiFi gateway
- Earth fault monitoring (PE protection)
- PC interface for PC300 XQ software
- The high 1500 W cooling capacity, high-performance centrifugal pump and 8-litre coolant tank make for excellent torch cooling, resulting in cost savings on consumables
Configuration
- 090-005671-00000 Tetrix XQ 400 puls DC TIG DC pulse welding machine including all characteristics and functions, demodular
- 092-003303-00000 OW F06W Water cooling
- 092-003316-00000 OW F06R1 Wheel kit with single cylinder mount
- 092-003349-00000 OW MCord 6 mm² 5m Mains connection lead, 5 m
- 092-004340-00000 OW Comfort 3.0 DC Comfort 3.0 DC control
- 092-004344-00000 OW 5POL Welding torch control cable connection: Tuchel, 5-pole, compatible with EWM X technology
- 092-004376-00000 OW NDGC F.06 No gas control
- 092-004377-00000 OW N+1/7Pol BUS (F.06) No second 7-pole bus plug
Other options are possible on request.
92404
124658
91640
6105
124396
8776
Welding site equipment
- Please choose all necessary components to complete your system here.
-
blueCool -10 5 lCoolant for water-cooled welding machines and cooling unitsnone
5 l 30,75 €*/36,59 €**
25 l 136,25 €*/162,14 €**
-
TIG 450F WD GRIP 5P RETOX XQ HFL 4 mWater-cooled TIG welding torch with a highly flexible hose package (high-flex leather) Setting and display of...none
4 m 783,57 €*/932,45 €**
8 m 880,49 €*/1.047,78 €**
-
WK70mm² Ø 13 mm 450A/60% 4m/ZWorkpiece lead with clamp 70 mm² - 95 mm²none
450 A / 60 %, 70 mm² 140,00 €*/166,60 €**
550 A / 60 %, 95 mm² 166,00 €*/197,54 €**
-
GH 2x1/4'' 2mEquipped with plastic nuts on both sides for tool-free assembly Gas type: Argon/H2/CO2 (forming gas)none
2 m 21,10 €*/25,11 €**
3 m 30,10 €*/35,82 €**
5 m 41,00 €*/48,79 €**
10 m 61,40 €*/73,07 €**
GH 2x1/4'' 15m 88,90 €*/105,79 €**
-
Proreg Ar/CO2 230bar 15l DPressure regulator with manometernone
15 l 73,50 €*/87,47 €**
30 l 73,50 €*/87,47 €**
Control
- Popular, praised and simply indispensable
- Two large, easy-to-read 7-segment displays
- Five favourites buttons
- Click wheel for convenient use with welder’s gloves
- Reliable push-button operation
- Direct access to all main functions
- All parameters at a glance
- AC and DC versions available
Welding process | TIG |
DC TIG | |
MMA DC | |
E-Hand cel | |
Operating modes | Non-latched |
Latched | |
spotArc | |
spotmatic | |
Ignition options | HF |
Liftarc | |
Pulse type | Average value pulsing (0.2 Hz–20 kHz) incl. waveform setting (soft, middle, hard) |
Thermal pulsing (time pulsing) | |
Automatic pulsing incl. waveform setting (soft, middle, hard) | |
Functions | activArc |
Automatic gas post-flow function | |
Cable resistance alignment | |
MMA functions | Hotstart |
Arcforce | |
Antistick | |
Average value pulsing | |
Job functions | Number of freely definable Jobs 100 TIG, 8 MMA, 8 MMA Cel |
JOB manager (JOBs can be copied and reset individually, save and load on USB) |
Technical data
Version | Tetrix XQ 400 puls DC W COMF3 5P |
Setting range for welding current | 3 A - 400 A |
Duty cycle 40 °C | 400 A / 80 % |
370 A / 100 % | |
Open circuit voltage | 82 V |
Mains voltage (ex works) | 3 x 380 V - 400 V |
Mains voltage (possible) | 3 x 440 V - 460 V |
Mains voltage (possible) | 3 x 480 V - 500 V |
Mains tolerances (ex works) | -25 % up to +20 % |
Mains frequency | 50 Hz / 60 Hz |
Recommended generator power | 18.4 kVA |
Efficiency | 90 % |
Power consumption Pi | 25 W |
Cooling capacity at 1 l/min. | 1500 W |
Pump pressure | 3.5 bar |
Tank capacity | 8 l |
Protection classification | IP23 |
Test mark | |
EMC class | A |
Dimensions (L x B x H) | 1152 mm x 686 mm x 976 mm |
45.4 inch x 27 inch x 38.4 inch | |
Weight | 126.5 kg / 278.9 lbs |
Standards | IEC 60974-1, -2, -3 and -10 CL.A |
Note
- The mains voltage can be adapted by connecting a plug with a different operating voltage. The voltage may only be adjusted by a qualified electrician in accordance with the respective national legislation and regulations.
Documents
Accessories
Show all
Components and accessories
Workshop equipment
Xnet Welding Management System
Welding filler metals
Welding torches
Oxy-acetylene equipment and gas supply