Tetrix 200 DC Smart 2.0 puls 8P
Sample image, your configuration may differ.
The price shown includes the following components:
- TIG DC welding machine, portable, gas-cooled, decentral, 8-pole connection socket
- Workpiece lead with clamp, 290 A / 60 %, 35 mm²
- Gas hose, 2 m
- Pressure regulator with manometer, 15 l
- TIG welding torch, up/down, gas-cooled, 4 m
Description
- Gas-cooled DC TIG inverter welding machine
- Welding procedures and functions
- TIG welding
- activArc – Precise, focussed arc with reduced heat input and deep penetration for optimum root fusion
- To find out more about our high-tech TIG arcs, please click on TIG-Process
- Electronic HF start
- TIG lift arc welding
- TIG average value pulsing: the preset welding current is maintained at all times, so particularly suitable for welding as per welding procedure specification
- Non-latched/latched operation
- Spot welding/tack function (spotArc/spotmatic)
- MMA welding
- Adjustable hot start current and hot start time
- Adjustable Arcforce
- MMA average value pulsing
- Antistick function
- Your benefits
- Energy-saving thanks to high efficiency and standby function
- Connection capability for remote control and function torch
- 3.5 m mains lead with 16 A earthed plug
- Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage
91635
6105
124396
10173
Welding site equipment
- Please choose all necessary components to complete your system here.
-
Tetrix 200 DC Smart 2.0 puls 8PTIG DC welding machine, portable, gas-cooled, decentral, 8-pole connection socket
090-000262-00504 2.285,00 €* / 2.719,15 €**
-
WK35mm² Ø 13 mm 290A/60% 4m/KWorkpiece lead with clamp 16 mm² - 50 mm²
none
170 A / 60 %, 16 mm² 45,60 €*/54,26 €**
290 A / 60 %, 35 mm² 62,70 €*/74,61 €**
350 A / 60 %, 50 mm² 87,00 €*/103,53 €**
-
GH 2x1/4'' 2mEquipped with plastic nuts on both sides for tool-free assembly Gas type: Argon/H2/CO2 (forming gas)
none
2 m 21,10 €*/25,11 €**
3 m 30,10 €*/35,82 €**
5 m 41,00 €*/48,79 €**
10 m 61,40 €*/73,07 €**
GH 2x1/4'' 15m 88,90 €*/105,79 €**
-
Proreg Ar/CO2 230bar 15l DPressure regulator with manometer
none
15 l 73,50 €*/87,47 €**
30 l 73,50 €*/87,47 €**
-
TIG 150 GD GRIP 8P U/D 4mGas-cooled TIG welding torch Setting of welding current, in case of Synergic control, JOB switching is also...
none
4 m 315,72 €*/375,71 €**
8 m 369,91 €*/440,19 €**
Control
Smart 2.0 DC
- One-knob operation
- Welding sequence selection and parameter setting using click wheel or conventional operation with sequence buttons (back/forward)
- Expert menu for advanced welding parameter settings
- Welding sequence parameter setting
- Start, welding, secondary and end current
- Up-slope/down-slope time
- Gas pre- and post-flow time
- Electrode diameter
- Welding sequence parameters set with LED user guidance
- Start, welding, secondary and end current
- Pulse time and pulse pause time with corresponding slope times
- Up-slope/down-slope time
- Gas pre- and post-flow time
- Electrode diameter
| Welding process | TIG |
| activArc | |
| spotArc | |
| spotmatic | |
| MMA | |
| Operating modes | Non-latched |
| Latched | |
| Ignition options | HF |
| Liftarc | |
| Pulse type | Average value pulsing |
| Parameters in display | Welding current |
| Welding voltage | |
| Welding parameters | |
| Welding power | |
| Functions | Gas pre- and post-flow time |
| Up-slope/down-slope time | |
| Start, welding, secondary and end current | |
| Pulse and break current | |
| Electrode diameter | |
| Pulse frequency and balance | |
| MMA functions | Hotstart |
| Arcforce | |
| Antistick | |
| Average value pulsing |
Technical data
| Version | Tetrix 200 Smart 2.0 puls 8P TG |
| Setting range for welding current | 5 A - 200 A |
| Duty cycle 40 °C | 200 A / 25 % |
| 150 A / 60 % | |
| 140 A / 100 % | |
| Open circuit voltage | 63 V |
| Mains voltage (ex works) | 1 x 230 V |
| Mains tolerances (ex works) | -40 % up to +15 % |
| Mains frequency | 50 Hz / 60 Hz |
| Recommended generator power | 8.1 kVA |
| Efficiency | 86 % |
| Torch connection | Burndy, 8-pole |
| Protection classification | IP23 |
| Test mark | |
| EMC class | A |
| Dimensions (L x B x H) | 428 mm x 181 mm x 294 mm |
| 16.9 inch x 7.1 inch x 11.6 inch | |
| Weight | 10 kg / 22.1 lbs |
| Standards | IEC 60974-1, -3 and -10 CL.A |
Documents
Accessories
Show all
Components and accessories
Workshop equipment
Oxy-acetylene equipment and gas supply
Welding torches
