Optrel e684 Ready-to-Weld e3000X Frischluft-Schweißhelm

Fully automatic welding helmet with true colour reproduction, including fresh air system
Perfect viewing angle dependency in accordance with the EN 379 standard
Infinitely adjustable, with “Super High” sensitivity and tacking mode
Suitable for overhead and positional welding
Comfortable headband: Guarantees optimum weight distribution and is easy on the neck and throat
With e3000X fan respirator system: Fan respirator with integrated air flow sensor and 3-stage controllable air flow. Integrated particle filter of highest class (TH3). Reliably protects against smoke, aerosols and dust.
optrel specials:

Patented eccentric: Positions the helmet perfectly on your head – with a single turn.
True colour view: the welding helmet is characterised by realistic colour perception that is tailored to the respective task area
Autoshade: Automatic protection level regulation over the range SL 5-13 with individual calibration option of ± 2 protection levels. The autopilot can be switched off if required, and the protection level can be set manually.
Sensor slider: Adjust the detection angle of the sensor system to your individual needs
Grinding mode: Easy switching between grinding mode and welding work using the robust, well-protected pressure switch on the exterior.

All electric welding procedures: Electrode welding (stick welding, SMAW) / MIG / MAG (gas-shielded metal-arc welding, GMAW) / GMAW high-performance welding / flux-cored wire welding / TIG welding (TIG, GTAW) / plasma welding / microplasma welding / plasma cutting / grinding mode. Suitable for overhead welding/
Not suitable for laser beam welding!

Standards	EN 379
	EN 175
UV/IR protection	at every shade level setting
Light state shade level	4
Dark state shade level	5 - 13
Response time light/dark (23 °C)	0.17 ms
Brightening time dark/light	100 ms - 2000 ms
Viewing field	100 mm x 50 mm
Battery life	3000 h
Battery life	3000 h
Fresh air system battery life	18 h
Usage	MIG/MAG, TIG, MMA, plasma, microplasma, plasma cutting
Version	Welding helmet
Weight	500 g
Approvals	CE / Australian Standard
Operating temperature	-10 °C - 70 °C
Classification to EN 379	1/1/1/1

Show all

Protective equipment and safety

Welding helmet e684 Ready-to-Weld e3000X