Connection to “F3” MIG/MAG welding fume extraction torches: Extraction hose for connection to “F3” MIG/MAG welding fume extraction torches 092-004541-00xxx
Connection to welding fume extraction torch kits: Extraction hose for connecting welding fume extraction kits 092-004545-00xxx
Connection to “F1” TIG welding fume extraction torches: Extraction hose for connection to “F1” TIG fume extraction torches 092-004544-00xxx
Digital, 7-pole cable absolutely necessary for EWM automatic start/stop for welding machines with 7-pole system bus connection
Automatic start/stop for devices without a 7-pin connection: 398-002018-00000

High-vacuum extraction system with cleanable filter
Direct extraction of harmful emissions where they arise
For use with EWM welding fume extraction torches
Start the extraction process using the EWM automatic start/stop feature or manually using the rotary knob
Integrated EWM automatic start/stop feature saves time and conserves energy:

For all EWM MIG/MAG welding machines with 7-pole system bus connections
Extraction starts automatically upon gas pre-flow before the arc is struck, and extraction switches off automatically following gas post-flow

Extraction of large volumes of fumes/dust
Continuous use in industry and trade
Mobile in use when changing work sites thanks to its compact design with large bow handle and convenient wheels (two guide castors)

Infinitely variable extraction power pre-selection
Optimal adaptation of the flow rate to the welding process thanks to infinitely variable extraction power control
Extraction power control for a constant flow rate, even with increasing filter saturation (optional)
Convenient one-knob operation, even while wearing gloves

Optimum health protection for users thanks to KemTex® ePTFE filter cartridges with surface filtration
Automated filter cleaning (initiated manually)
Side-channel blower guarantees consistently high extraction capacity
USB Type-A charging port (e.g. for smartphones)
Quick and easy filter changes
Optional slot and funnel nozzles can be connected

Connection voltage	1 x 230 V / 50 Hz
Engine output	1.5 kW
Extraction capacity	160 m³/h
Max. vacuum	24000 Pa
Ø connecting flange	45 mm
Separation level >	99.9 %
Noise level (at 100% extraction capacity)	75 dB(A)
Dimensions (length x width x height)	1182 mm x 594 mm x 627 mm
Weight	65 kg
Filter stages	1
Filtering methods	Cleaning filter
Filter area approx.	6.7 m²
Filter class	M
Filter material	ePTFE membrane
IFA approval	W3 tested
Standards	DIN EN ISO 21904-1+2
Test mark