Microplasma 55-2
Sample image, your configuration may differ.
The price shown includes the following components:
- Microplasma welding machine with standard gas metering unit
- ,
- “blueCool” coolant to -10 °C (-14 °F), 5 l, 5 l
- Transport cart (four wheels) for moving a power source, cooling unit or a tool box and two shielding gas cylinders, Two shielding gas cylinders
- Workpiece lead with clamp, 170 A / 60 %, 16 mm²
- Gas hose, 2 m
- Gas hose,
- Pressure regulator "Maxex", :
- Cylinder pressure regulator, :
- Water-cooled plasma welding torch,
- Electrode setting gauge, suitable for PHW 100/150 and PWM 100/150
- Threaded adapter for connecting 1/4" left-hand thread gas hoses to welding machines with 1/4" right-hand connecting nipples,
Description
- Standard gas metering unit for plasma gas and shielding gas:
- Plasma gas setting range 0.1 l/min to 0.9 l/min
- Shielding gas setting range 1.0 l/min to 17 l/min
- Microplasma welding machine with standard gas metering unit
- Welding procedures and functions
- Plasma and TIG welding
- Plasma and pulsed TIG welding
- Plasma and pulsed TIG welding up to the kHz range allow a high welding speed with minimal heat input using a constricted arc
- Plasma and TIG welding current adjustable in 0.1 A increments
- Pilot arc current separately adjustable for start phase, welding phase, end-crater and welding break
- Temperature, flow and pressure monitoring for the coolant circuit
- Non-latched/latched operation
- Spot welding/tack function (spotArc/spotmatic)
- Adjustable up-slope and down-slope time
- Spotmatic – reduce the time required for tacking by up to 50% (TIG only)
- Adjustable gas pre- and post-flow time
- Your benefits
No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works- Non-interchangeable connections for all mediums
- Welding torch connection using quick connect coupling
- Connection capability for remote control
- Two system bus connections (e.g. for ewm Xnet)
- All control elements and connections for welding torches, remote controls and workpiece leads are directly accessible on the front of the machine
- Microplasma and Cool 50 MPW50, mobile with Trolly 55-6
- No additional mains connection required for cooling unit. Power supply to the Cool 50 MPW50 via the Microplasma
- Alternatively, at high currents, duty cycles and ambient temperatures, a separate recooling unit can be used (the recooling unit does not fit under the Microplasma or on the Trolly 55-6)
- Optional network connectivity with ewm Xnet software via LAN or WiFi gateway
- 3.5 m mains supply lead with 16 A shock-proof plug
- Always read the information in the operating instructions of the relevant welding torch and welding machine before carrying out any welding.
134493
92404
42802
91637
6105
41813
15690
15691
41808
43106
26243
Welding site equipment
- Please choose all necessary components to complete your system here.
-
Microplasma 55-2Microplasma welding machine with standard gas metering unit
090-007031-00502 8.350,00 €* / 9.936,50 €**
-
RK 1High-performance recooling unit with fully thermal motor compressor
none
RK 1 3.880,00 €*/4.617,20 €**
-
blueCool -10 5 lCoolant for water-cooled welding machines and cooling units
none
5 l 30,75 €*/36,59 €**
25 l 136,25 €*/162,14 €**
-
Trolly 55-6 DFTrolley
none
A shielding gas cylinder 806,00 €*/959,14 €**
Two shielding gas cylinders 832,00 €*/990,08 €**
-
WK16mm² Ø 9 mm 170A/60% 4m/KWorkpiece lead with clamp 16 mm² - 25 mm²
none
170 A / 60 %, 16 mm² 31,40 €*/37,37 €**
230 A / 60 %, 25 mm² 47,20 €*/56,17 €**
-
GH 2x1/4'' 2mEquipped with plastic nuts on both sides for tool-free assembly Gas type: Argon/H2/CO2 (forming gas)
none
2 m 21,10 €*/25,11 €**
3 m 30,10 €*/35,82 €**
5 m 41,00 €*/48,79 €**
10 m 61,40 €*/73,07 €**
GH 2x1/4'' 15m 88,90 €*/105,79 €**
-
Maxex AR/MIX 200bar 30m³ G1/4"Single-stage pressure regulator for measuring pressure :
none
: 195,40 €*/232,53 €**
-
Maxex Hydrogen 200bar 30m³ G3/8"LSingle-stage pressure regulator for measuring pressure :
none
: 195,40 €*/232,53 €**
-
EAG PHW100/150Electrode setting gauge
none
suitable for PHW 100/150... 36,96 €*/43,98 €**
suitable for PHW 20 24,50 €*/29,16 €**
Dental version, suitable... 27,20 €*/32,37 €**
-
ADAP3 G1/4-G1/4 LKSThreaded adapter for connecting 1/4" left-hand thread gas hoses to welding machines with 1/4" right-hand connecting...
none
ADAP3 G1/4-G1/4 LKS 17,30 €*/20,59 €**
Control
Comfort 2.0 P
- One-knob operation
- Welding sequence selection and parameter setting using click wheel or conventional operation with sequence buttons (back/forward)
- Expert menu for advanced welding parameter settings
| Welding process | Plasma |
| DC TIG | |
| Operating modes | Non-latched |
| Latched | |
| spotArc | |
| spotmatic | |
| Pulse type | Automated pulsing |
| Seconds pulse | |
| kHz pulsing | |
| Number of JOBs | 100 |
| Functions | Gas test, purging |
Technical data
| Version | Microplasma 55-2 |
| Setting range for welding current | 0.3 A - 50 A |
| Duty cycle 40 °C | 50 A / 100 % |
| Open circuit voltage | 95 V |
| Mains voltage (ex works) | 1 x 230 V |
| Mains tolerances (ex works) | -40 % up to +15 % |
| Mains frequency | 50 Hz / 60 Hz |
| Recommended generator power | 4.2 kVA |
| Efficiency | 81 % |
| Power consumption Pi | 30 W |
| Protection classification | IP23 |
| Test mark | |
| EMC class | A |
| Dimensions (L x B x H) | 625 mm x 377 mm x 531 mm |
| 24.6 inch x 14.8 inch x 20.9 inch | |
| Weight | 36.2 kg / 79.8 lbs |
| Standards | IEC 60974-1, -3 and -10 CL.A |
Documents
Accessories
Show all
Components and accessories
Xnet Welding Management System
Welding torches
