Pico 400 cel puls pws
Sample image, your configuration may differ.
The price shown includes the following components:
- MMA inverter welding machine, pole reversing switch
- Workpiece lead with clamp, 350 A / 60 %, 50 mm²
- Electrode holder with cable, 350 A / 60 %, 50 mm²
- Mains plug, assembled,
Description
- Robust and handy CC/CV multiprocess inverter welding machine with built-in pole reversing switch, suitable for use on building sites
- Welding procedures and functions
- CC/CV characteristic
- MMA and pulsed TIG welding
- MMA welding
- TIG lift arc welding
- PF pulse function
- Cel characteristic
- Arcforce, hot start, antistick
- Arcforce and hot start can be set
- Welding polarity can be reversed by pressing a button (polarity reversing switch)
- GMAW welding with Pico drive 4L
- Suitable for flux cored wire welding
- Your benefits
- PRS: Pole reversal on the machine or via remote control saves time-consuming reconnecting of welding current connections
- Perfect MMA vertical-up welding thanks to PF pulse function
- Cellulose electrodes: 100% safe for vertical-down welding
- Unlimited generator operation even with long mains leads thanks to high mains voltage tolerances
- Robust design suitable for construction site use
- Impact-resistant casing
- Connection capability for remote control
- Inspected protection against splash water
- Portable, shoulder strap
- Energy-saving thanks to high efficiency and standby function
- 5 m mains supply lead
- Available with open circuit voltage reduction, VRD (to AS 1674.2-2003; IEC/DIN EN 60974-1 and ГОСТ 12.2 007.8)
- Included in the delivery ex works:
- Practical cable strap for easy and organised transport of e.g. earth cable, welding torch, electrode holder, etc. (see figure 2)
- Cable holder for winding up the mains cable – guarantees convenient transport (see figure 3)
Note
- See the diagram for possible transport systems:
91636
91651
8774
Welding site equipment
- Please choose all necessary components to complete your system here.
-
Pico 400 cel puls pwsMMA inverter welding machine, pole reversing switch
090-002067-00502 5.095,00 €* / 6.063,05 €**
-
WK50mm² Ø 13 mm 350A/60% 4m/KWorkpiece lead with clamp 16 mm² - 50 mm²
none
170 A / 60 %, 16 mm² 45,60 €*/54,26 €**
290 A / 60 %, 35 mm² 62,70 €*/74,61 €**
350 A / 60 %, 50 mm² 87,00 €*/103,53 €**
-
EH 50m² Ø13 mm 350A/60% 4mFully assembled electrode holder with cable 16 mm² - 95 mm²
none
170 A / 60 %, 16 mm² 50,00 €*/59,50 €**
290 A / 60 %, 35 mm² 90,00 €*/107,10 €**
350 A / 60 %, 50 mm² 112,00 €*/133,28 €**
450 A / 60 %, 70 mm² 140,00 €*/166,60 €**
550 A / 60 %, 95 mm² 160,00 €*/190,40 €**
-
OW CEE 16A/400VMains plug, factory fitting (no retrofitting)
none
OW CEE 16A/400V 34,80 €*/41,41 €**
Control
MMA Pro pws
- One-knob operation with welding data display
| Welding process | MMA |
| TIG lift arc | |
| MIG/MAG CC/CV | |
| Pulse type | Average value pulsing |
| MMA functions | PWS |
| Average value pulsing | |
| Antistick | |
| Arcforce |
Technical data
| Version | Pico 400 cel puls pws |
| Setting range for welding current | 10 A - 400 A |
| Duty cycle 40 °C | 400 A / 25 % |
| 280 A / 60 % | |
| 230 A / 100 % | |
| Open circuit voltage | 95 V |
| Mains voltage (ex works) | 3 x 400 V |
| Mains tolerances (ex works) | -25 % up to +20 % |
| Mains frequency | 50 Hz / 60 Hz |
| Recommended generator power | 24.6 kVA |
| Efficiency | 88 % |
| Power consumption Pi | 28 W |
| Protection classification | IP34 |
| Test mark | |
| EMC class | A |
| Dimensions (L x B x H) | 539 mm x 210 mm x 415 mm |
| 21.2 inch x 8.3 inch x 16.3 inch | |
| Weight | 25 kg / 55.1 lbs |
| Standards | IEC 60974-1 and -10 CL.A |
Documents
Accessories
Show all
Components and accessories
Welding torches
