Taurus 400 Basic TDG
Sample image, your configuration may differ.
The price shown includes the following components:
- MIG/MAG inverter welding machine, portable
- Wire feeder, Taurus drive 4L Basic
- Intermediate hose package, gas-cooled, 19-pole, 1 m
- Wire spool adapter B300,
- MIG/MAG welding torch, gas-cooled, 4 m
- Workpiece lead with clamp, 350 A / 60 %, 50 mm²
- Mains plug, assembled,
Description
- MIG/MAG welding machine with separate Taurus drive 4L Basic wire feeder
- Welding procedures and functions
- Most simple operation and selection of the welding tasks CV (MAG)/CC (MMA)
- Welding with solid wire and flux cored wire
- Adjusted parameters for welding with mixed gas or 100% CO2 at the push of a button
- Suitable for MMA welding and gouging at no extra charge
- Stick electrodes up to 6 mm diameter
- Hot start and Arcforce adjustable
- Infinitely adjustable arc dynamics (choke effect)
- Your benefits
No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works- Robust design suitable for construction site use
- Impact-resistant casing
- Inspected protection against splash water (IP-34s)
- Energy-saving thanks to high efficiency and standby function
- Best suited for use with long hose packages
- Included in the delivery ex works:
- Practical cable strap for easy and organised transport of e.g. earth cable, welding torch, electrode holder, etc. (see figure 2)
- Cable holder for winding up the mains cable – guarantees convenient transport (see figure 3)
20849
129541
8744
41529
91636
8776
Welding site equipment
- Please choose all necessary components to complete your system here.
-
Taurus 400 Basic TDGMIG/MAG inverter welding machine, portable
090-005446-00502 2.465,00 €* / 2.933,35 €**
-
MIG G 19POL 70qmm 450A/60% 1mIntermediate hose package, gas cooled, 19-pole Cross-section: 70 mm²
none
1 m 242,00 €*/287,98 €**
5 m 438,00 €*/521,22 €**
10 m 675,00 €*/803,25 €**
15 m 914,00 €*/1.087,66 €**
20 m 1.132,00 €*/1.347,08 €**
30 m 1.604,00 €*/1.908,76 €**
-
PM 301 G M9 4 mGas-cooled MIG/MAG welding torch
none
3 m 375,00 €*/446,25 €**
4 m 394,00 €*/468,86 €**
5 m 412,00 €*/490,28 €**
-
WK50mm² Ø 13 mm 350A/60% 4m/KWorkpiece lead with clamp 16 mm² - 50 mm²
none
170 A / 60 %, 16 mm² 45,60 €*/54,26 €**
290 A / 60 %, 35 mm² 62,70 €*/74,61 €**
350 A / 60 %, 50 mm² 87,00 €*/103,53 €**
Control
E1.07
- Manual operating point setting using wire feed speed and welding voltage
- Mixed gas or CO2 characteristics – simply press button to change over
- Infinitely adjustable arc dynamics (choke effect) from soft to hard
- Adjusted parameters for welding with mixed gas or 100% CO2 at the push of a button
| Operation mode | Manual operating point adjustment |
| Operating modes | Non-latched |
| Latched | |
| Parameters in display | Welding current |
| Welding voltage | |
| Functions | Wire burn-back |
Technical data
| Version | Taurus 400 Basic |
| Setting range for welding current | 10 A - 400 A |
| Duty cycle 40 °C | 400 A / 30 % |
| 280 A / 60 % | |
| 230 A / 100 % | |
| Open circuit voltage | 80 V |
| Mains voltage (ex works) | 3 x 400 V |
| Mains tolerances (ex works) | -25 % up to +20 % |
| Mains frequency | 50 Hz / 60 Hz |
| Recommended generator power | 23.2 kVA |
| Efficiency | 88 % |
| Protection classification | IP34s |
| Test mark | |
| EMC class | A |
| Dimensions (L x B x H) | 539 mm x 210 mm x 415 mm |
| 21.2 inch x 8.3 inch x 16.3 inch | |
| Weight | 23.5 kg / 51.8 lbs |
| Standards | IEC 60974-1 and -10 CL.A |
Documents
Accessories
Show all
Components and accessories
Welding torches
Oxy-acetylene equipment and gas supply
