Set 1 x Sirion 405 puls
Sample image, your configuration may differ.
Note
- The Sirion 405 puls and 505 puls power sources can only be purchased as a complete package with the components listed below
- The power source and the wire feeder cannot be purchased separately
- You can choose from sets of one, three or six complete packages with a corresponding discount
Description
- Multiprocess MIG/MAG pulse welding machine in a set, consisting of a welding machine, wire feeder, cooling unit, trolley and 5 m intermediate hose package
- Drive 4X S with LP-S control:
- Drive XQ with LP-XQ control:
- Direct access to all the important settings options
- Quick change between innovative welding processes (without JOB switching)
- “Favourites” buttons for quick selection of frequently used JOBs
-
No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works
- 72 characteristics (JOBs) including EWM forceArc®* / forceArc® puls*, EWM rootArc®* / rootArc® puls* (forceArc®* / forceArc® puls* for the steel application area only)
- Synergic characteristics for MIG/MAG standard or pulsed welding for steel/CrNi/aluminium
- Synergic characteristics for flux-cored wires
- Non Synergic operation for manual setting of welding parameters
- Also suitable for MMA welding, TIG welding and gouging
- Individually configurable programs for JOBs (welding tasks)
- Adjustable start and end-crater functions
- Infinitely adjustable arc dynamics (choke effect)
- Your benefits
- Welding torch, water-cooled with Cool 55
- No additional mains connection required for cooling unit. Module power supply via welding machine
- Connection to EWM XQvac high vacuum extraction system possible – please contact us
- Energy-saving thanks to high efficiency and standby function
- Best suited for use with long hose packages
- Easy, tool-free change of welding polarity
- IP23 spray water protected
Select set
Included per set:
-
Cool 55 U40Cooling unit for modular welding machines
-
Sirion 405 pulsMultiprocess MIG/MAG pulse welding machine including all characteristics and welding processes, decompact, modular
-
Trolly 54-5Transportwagen (4 Rollen) zum Transport einer Stromquelle, eines Kühlmoduls, eines Drahtvorschubgerätes und einer...
-
Drive 4X SWire feeder
-
MIG W 7POL 70qmm 450A/60% 5mIntermediate hose package, water-cooled, 7-pole
Control
LP-S
- Direct access to all important settings options
- Changes between innovative welding processes quickly (without JOB switching)
- “Favourites” buttons for quick selection of frequently used JOBs
- Arc length correction
- Adjusting the arc dynamics (choke effect) from soft to hard
- Locking of control unit for e.g. transport at the push of a button
- Kilowatt display for calculating the energy per unit length
- Effective arc power for calculating the energy per unit length
| Operation mode | Synergic operation |
| Welding process | MIG/MAG |
| MIG/MAG pulse | |
| TIG lift arc | |
| MMA | |
| forceArc® (steel only) | |
| forceArc puls® (steel only) | |
| rootArc® | |
| rootArc puls® | |
| Operating modes | Non-latched |
| Latched | |
| Special non-latched | |
| Special latched (crater fill) | |
| Parameters in display | Welding current |
| Wire feed speed | |
| Plate thickness | |
| JOB number | |
| Program number | |
| Error code | |
| Freely adjustable programs per JOB | 15 |
| Number of JOBs | 72 |
| Functions | Wire burn-back |
| Wire creep | |
| Gas pre-flow time | |
| Gas post-flow time |
Technical data
| Version | Sirion 405 puls |
| Setting range for welding current | 5 A - 400 A |
| Duty cycle 40 °C | 400 A / 60 % |
| 350 A / 100 % | |
| Open circuit voltage | 82 V |
| Mains voltage (ex works) | 3 x 380 V - 400 V |
| Mains voltage (possible) | 3 x 440 V - 480 V |
| Mains tolerances (ex works) | -25 % up to +20 % |
| Mains frequency | 50 Hz / 60 Hz |
| Recommended generator power | 23.2 kVA |
| Efficiency | 89 % |
| Power consumption Pi | 23 W |
| Protection classification | IP23 |
| Test mark | |
| EMC class | A |
| Dimensions (L x B x H) | 625 mm x 298 mm x 531 mm |
| 24.6 inch x 11.7 inch x 20.9 inch | |
| Weight | 39.4 kg / 86.9 lbs |
| Standards | IEC 60974-1 and -10 CL.A |
Note
- The mains voltage can be adapted by connecting a plug with a different operating voltage. The voltage may only be adjusted by a qualified electrician in accordance with the respective national legislation and regulations.
Documents
Accessories
Show all
Components and accessories
Welding torches
Xnet Welding Management System
Workshop equipment
Oxy-acetylene equipment and gas supply
