Picomig 180 puls TKG Set
Sample image, your configuration may differ.
Description
- Multiprocess inverter welding machine and pulse set
- Easy Synergic one-knob operation and integrated wire feeder
- Set comprising:
- Picomig 180 puls, MT221G welding torch, flux cored wire spool (FCW 71T Selfshield 2 kg, 0.9 mm dia.), steel wire spool (SW 70S G3 2 kg, 0.8 mm dia.), workpiece lead, gas hose, pressure regulator and flux cored nozzle
- Welding procedures and functions
- GMAW pulsed welding and GMAW standard welding
- To find out more about our high-tech MIG/MAG arcs, please click on XQ-Process
- Significantly less spatter formation and therefore less finishing work, all thanks to the pulse function
- GMAW pulse welding of aluminium and aluminium alloys
- Characteristics for steel, CrNi, CuSi, aluminium and flux cored wires
- MMA welding and TIG lift arc welding
- Perfect for welding self-shielding flux cored wires
- Infinitely adjustable arc dynamics (choke effect)
- Non-latched/latched operation
- Interval welding
- Adjustable gas pre- and post-flow time
- Your benefits
- Portable, compact
No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works- Robust casing suitable for construction site use
- High open circuit voltage for excellent ignition characteristics
- 4-roll drive
- Energy-saving thanks to high efficiency and standby function
- Easy, tool-free change of welding polarity
- Insulated wire space
- 3.5 m mains supply lead with 16 A shock-proof plug
- Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355
- Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage
Note
- Possible transport systems can be found in the diagram:
Control
Picomig Puls
- Setting of all welding parameters and functions – easy setting of operating point, pre-programmed JOBs (welding tasks) can be selected from JOB list
- GMAW pulsed welding and GMAW standard welding
- Significantly less spatter formation and therefore less finishing work, all thanks to the pulse function
- GMAW pulse welding of aluminium and aluminium alloys
- Characteristics for steel, CrNi, CuSi, aluminium and flux cored wires
- MMA welding and TIG lift arc welding
- Perfect for welding self-shielding flux cored wires
- Infinitely adjustable arc dynamics (choke effect)
- Non-latched/latched operation
- Interval welding
- Adjustable gas pre- and post-flow time
| Operation mode | One-knob operation |
| Welding process | MIG/MAG |
| MIG/MAG pulse | |
| TIG | |
| MMA | |
| Operating modes | Non-latched |
| Latched | |
| Resistance spot welding | |
| Interval | |
| Parameters in display | Welding current |
| Wire feed speed | |
| Plate thickness | |
| JOB number | |
| Error code | |
| Polarity display | |
| Number of JOBs | 50 |
| Functions | Wire burn-back |
Technical data
| Version | Picomig 180 puls |
| Setting range for welding current | 5 A - 180 A |
| Duty cycle 40 °C | 180 A / 25 % |
| 120 A / 60 % | |
| 100 A / 100 % | |
| Open circuit voltage | 80 V |
| Mains voltage (ex works) | 1 x 230 V |
| Mains tolerances (ex works) | -40 % up to +15 % |
| Mains frequency | 50 Hz / 60 Hz |
| Recommended generator power | 8 kVA |
| Efficiency | 86 % |
| Wire feed speed | 1 m/min - 15 m/min |
| 39.37 ipm - 590.55 ipm | |
| Factory-installed roll equipment | 0.8 + 1.0 mm / Steel |
| Spool diameter | D200 |
| Torch connection | Euro torch connector |
| Protection classification | IP23 |
| Test mark | |
| EMC class | A |
| Dimensions (L x B x H) | 559 mm x 276 mm x 340 mm |
| 22 inch x 10.9 inch x 13.4 inch | |
| Weight | 16 kg / 35.3 lbs |
| Standards | IEC 60974-1, -5 and -10 CL.A |
Documents
Accessories
Show all
Components and accessories
Welding torches
Oxy-acetylene equipment and gas supply
