Phoenix 355 Progress puls LP MM TKM
Sample image, your configuration may differ.
The price shown includes the following components:
- Multiprocess MIG/MAG pulse welding machine with MULTIMATRIX technology, compact, portable, modular, LP control
- Cooling unit for compact, modular welding machines,
- Transport cart (four wheels) for moving a power source, cooling unit or a tool box and one shielding gas cylinder, assembled
- Wire spool adapter B300,
- MIG/MAG welding torch, water-cooled, 4 m
- Workpiece lead with clamp, 350 A / 60 %, 50 mm²
- Gas hose, 2 m
- Pressure regulator with manometer, 30 l
- Mains plug, assembled,
Description
- MIG/MAG inverter welding machine, pulse, with integrated wire feeder
- Welding procedures and functions
- Equipped at no extra charge with Synergic characteristics for GMAW welding of steel/CrNi/aluminium
- Suitable for MMA welding, TIG welding and gouging at no extra charge
- rootArc –
- Short arc with good modelling properties for easy gap-bridging and positional welding
- |forceArc –
- Low-heat, directionally stable and powerful arc with deep penetration for the upper power range
- |Pulsed arc –
- Controlled, short circuit-proof pulsed arc for all positions, especially in the transitional arc area
- Individually configurable programs for each welding task (JOB)
- Adjustable start and end-crater functions
- Infinitely adjustable arc dynamics (choke effect)
- Synergic or manual welding operation
- Your benefits
No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works- Choice of gas- or water-cooled operation
- High-precision, powerful EWM eFeed 4-roll wire feed mechanism for secure feeding of all solid and flux cored wires
- Equipped with 1.0–1.2 mm UNI rolls for low to high-alloy steel
- Wire spool diameter up to 300 mm/D300, 200 mm/D200 possible with adapter
- High open circuit voltage for excellent ignition characteristics
- Energy-saving thanks to high efficiency and standby function
- Connection capability for remote control and function torch
- Easy, tool-free change of welding polarity
- Insulated wire space
- IP23 spray water protected
- Optional network connectivity with ewm Xnet software via LAN or WiFi gateway
- PC interface for PC300 XQ software
- Excellent torch cooling, resulting in cost savings on consumables due to high-performance centrifugal pump and 5-litre water tank (cool50 cooling unit)
- Delivery includes practical torch holder
- Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355
134494
42594
8744
41607
91636
6105
124397
8774
Welding site equipment
- Please choose all necessary components to complete your system here.
-
Phoenix 355 Progress puls LP MM TKMMultiprocess MIG/MAG pulse welding machine with MULTIMATRIX technology, compact, portable, modular, LP control
090-005502-00502 6.240,00 €* / 7.425,60 €**
-
Cool 55 C U40Cooling unit for compact, modular welding machines
none
Cool 55 C U40 1.280,00 €*/1.523,20 €**
-
Cool 55 C U42Cooling unit with boosted pump for compact, modular welding machines
none
Cool 55 C U42 1.992,00 €*/2.370,48 €**
-
Trolly 55-5Transport cart (four wheels) for moving a power source, cooling unit or a tool box and one shielding gas cylinder
none
assembled 497,00 €*/591,43 €**
disassembled 485,00 €*/577,15 €**
-
Trolly 35.2-2Transport cart (two rolls) for transporting a power source, a cooling unit and a gas cylinder
none
Trolly 35.2-2 653,00 €*/777,07 €**
-
Trolly 53Saves space
none
Trolly 53 183,00 €*/217,77 €**
ON TG.03/04 MS TR.20/21 35,40 €*/42,13 €**
-
Trolly 54Transport cart (four wheels) for moving a power source, cooling unit or a tool box and one shielding gas cylinder
none
Trolly 54 313,00 €*/372,47 €**
ON TG.03/04 MS TR.20/21 35,40 €*/42,13 €**
-
Trolly 55-6Trolley
none
A shielding gas cylinder 806,00 €*/959,14 €**
Two shielding gas cylinders 832,00 €*/990,08 €**
-
PM 301 W M7 4 mWater-cooled MIG/MAG welding torch
none
3 m 437,00 €*/520,03 €**
4 m 469,00 €*/558,11 €**
5 m 501,00 €*/596,19 €**
-
WK50mm² Ø 13 mm 350A/60% 4m/KWorkpiece lead with clamp 16 mm² - 50 mm²
none
170 A / 60 %, 16 mm² 45,60 €*/54,26 €**
290 A / 60 %, 35 mm² 62,70 €*/74,61 €**
350 A / 60 %, 50 mm² 87,00 €*/103,53 €**
-
GH 2x1/4'' 2mEquipped with plastic nuts on both sides for tool-free assembly Gas type: Argon/H2/CO2 (forming gas)
none
2 m 21,10 €*/25,11 €**
3 m 30,10 €*/35,82 €**
5 m 41,00 €*/48,79 €**
10 m 61,40 €*/73,07 €**
GH 2x1/4'' 15m 88,90 €*/105,79 €**
-
Proreg Ar/CO2 230bar 30l DPressure regulator with manometer
none
15 l 73,50 €*/87,47 €**
30 l 73,50 €*/87,47 €**
-
OW CEE 16A/400VMains plug, factory fitting (no retrofitting)
none
OW CEE 16A/400V 34,80 €*/41,41 €**
Control
LP
- Synergic one-knob operation: The operating point can be set with a single knob thanks to easy JOB (welding task) preselection
- LP control: All the important setting options with direct access
- Arc length correction
- Adjusting the arc dynamics (choke effect) from soft to hard
- Locking of control unit for e.g. transport at the push of a button
- Kilowatt display for calculating the energy per unit length
- Effective arc power for calculating the energy per unit length
| Operation mode | Synergic operation |
| Welding process | MIG/MAG |
| MIG/MAG pulse | |
| TIG lift arc | |
| MMA | |
| forceArc® | |
| forceArc puls® | |
| rootArc® | |
| rootArc puls® | |
| superPuls | |
| Gouging | |
| Operating modes | Non-latched |
| Latched | |
| Special non-latched | |
| Special latched (crater fill) | |
| Resistance spot welding | |
| Parameters in display | Welding current |
| Welding voltage | |
| Wire feed speed | |
| Plate thickness | |
| JOB number | |
| Program number | |
| Error code | |
| Effective arc power | |
| Motor current | |
| Kilowatt indicator | |
| Freely adjustable programs per JOB | 16 |
| Number of JOBs | 335 |
| Functions | Wire burn-back |
| Wire creep | |
| Gas pre-flow time | |
| Gas post-flow time |
Technical data
| Setting range for welding current | 5 A - 350 A |
| Duty cycle 40 °C | 350 A / 40 % |
| 300 A / 60 % | |
| 270 A / 100 % | |
| Open circuit voltage | 79 V |
| Mains voltage (ex works) | 3 x 400 V |
| Mains tolerances (ex works) | -25 % up to +20 % |
| Mains frequency | 50 Hz / 60 Hz |
| Recommended generator power | 18.8 kVA |
| Efficiency | 88 % |
| Wire feed speed | 0.5 m/min - 25 m/min |
| 19.685 ipm - 984.253 ipm | |
| Factory-installed roll equipment | 1,0-1,2 mm UNI / Steel |
| Spool diameter | D200/D300 |
| Torch connection | Euro torch connector |
| Protection classification | IP23 |
| Test mark | |
| EMC class | A |
| Dimensions (L x B x H) | 636 mm x 298 mm x 482 mm |
| 25 inch x 11.7 inch x 19 inch | |
| Weight | 36.2 kg / 79.8 lbs |
| Standards | IEC 60974-1, -5 and -10 CL.A |
Documents
Accessories
Show all
Components and accessories
Welding torches
Workshop equipment
Xnet Welding Management System
Oxy-acetylene equipment and gas supply
