RIEGLER Standard Gewinde mm 19.17 Filterregler
Sample image, your configuration may differ.
Description
- standard · inlet pressure-independent, back-controllable, membrane pressure regulator with secondary venting in combination with a centrifugal separator, internal thread, with polycarbonate container · Further technical information A: 82mm · C: 130.0mm · D: 169.4mm · Spring housing: POM brass · W: 299.4mm · Sealing material: NBR
- Filter regulator standard thread mm 19.17 BG III G 1/2 inch 0.5 - 10 bar 3000 l/
Technical data
| Produkteigenschaften Drain valve | halbautomatisch |
| DN | 14 MM |
| Durchfluss | 3000 l/min |
| Durchflusswertmessung | bei P1 = 8. P2 = 6 und Druckabfall Δp = 1 Bar |
| Inlet pressure | max. 16 Bar |
| Filterfeinheit | 5 (40 μm bei BG IV) µm |
| Housing | Die cast zinc |
| Thread | G 1/2 ″ |
| Gewinde mm | 19.17 |
| Marke | Riegler |
| Version | Gewinde mm 19.17 |
| BG III G 1/2 ″ | |
| 0.5 - 10 bar 3000 l/min | |
| Weight | 1810 g |
| Dimensions LxWxH in mm | 420 mm x 110 mm x 110 mm |
| Item number | 100925 |
Documents
| Manuals | |
| Show more language versions... |
| Informations | |
| Datenblatt | |
