KUKKO 15 Öffnung A 8 - 60 mm Trennvorrichtung
Description
- Application: for pulling off ball bearings, roller bearings, inner races and other flush-seated parts · the sharp cutting edges enable the pulling-off of flush parts, where 2-armed and 3-armed pullers cannot be used(Fig. 1) · the clamping of the separating jaws is implemented through uniform loosening of the nuts on the side boltsWorking principle:the stripping is implemented through tightening the spindle against the shaft end (Figure 2 and 3), in case of the large pulling devices, hydraulic operation is also possibleoperation with hydraulics (Figure 4): (hydraulics not included in the scope of supply)screw the spindle of the hydraulics into the screw thread of the cross beam of the pulling device with the spanner (b) · until the pressure pad presses securely against the shaft, then activate the hydraulics by rotating the upper spindle (a) · Caution:Figures 2 and 3 show the separating device in combination with the pulling device article no. 4157 490 000, 4157 490 001, 4157 490 002, 4157 490 003 (not included in the scope of supply)Figure 4 shows the separating device in combination with the pulling device article no. 4157 490 000, 4157 490 001, 4157 490 002, 4157 490 003 and a hydraulic spindle (pulling device and hydraulic spindle not included in the scope of supply)Hydraulic spindle, please enquire separately · Further technical information Weight: 0.69 kg
- Separating device 15 opening A 5 - 60 mm art. no. 41 57 490 000 KUKKO
Technical data
Produkteigenschaften Marke | KUKKO |
Model | 15-0 |
Öffnung A | 8 - 60 MM |
Öffnung B | 60 MM |
passende Abziehvorrichtung | Art.-Nr. 4157 490 000 |
Version | Öffnung A 8 - 60 mm |
für Art.-Nr. 4157 490 000 | |
Weight | 700 g |
Dimensions LxWxH in mm | 135 mm x 105 mm x 25 mm |
Item number | 15-0 |
Documents
Manuals | |
Show more language versions... |
Informations | |
Sicherheitsdatenblatt |
Suitable for
Show all
Industrial and craft supplies