STAHLWILLE 730/80 Fix 160 - 800 Nm Drehmomentschlüssel
Sample image, your configuration may differ.
Description
- Torque wrench Service MANOSKOP® 730 Fix 160 - 800 Nm 22 x 28 mm STAHLWILLE
- with mount for insertion tools · releasing · for work in series production · adjustment knob can be screwed out after adjustment of the release torque · an unintentional change of the setpoint torque is thus prevented · The locking screw supplied also protects against manipulation or tampering · in the same way as the enclosed adhesive seals. no adjustment possible without seal break · QuickRelease safety locking · rapid, precise adjusting using QuickSelect fast adjustment · double-stop signal · very easily readable double scale with differentiation of Nm/ft in colour·lb and ft·lb/in·lb · left-hand tightening through reversing the insertion tools · 2-component handle (resistant to oils, greases, fuels, brake fluids and Skydrol) · accuracy ± 3% tolerance of the set value · Special feature:no resetting to "0" required, since measuring element is loaded only during the tightening procedure · further loading opposite the functional direction after releasing or loading, e.g. in case of stuck screws, does not act on the release mechanism which, as a result, is protected against damage Supplied with factory certificate, operating instructions, in transparent plastic tubes
Technical data
| Produkteigenschaften Arbeitsbereich lbf.in lbf.ft. | 120 - 600 lbf.ft |
| Arbeitsbereich N.m | 160 - 800 Nm |
| Support mm | 22 x 28 MM |
| Length | 1178 MM |
| Marke | STAHLWILLE |
| Model | 730/80 Fix |
| Skalenteilung | 50 Nm |
| Version | 160 - 800 Nm |
| 22 x 28 mm | |
| Weight | 10500 g |
| Dimensions LxWxH in mm | 1510 mm x 135 mm x 95 mm |
| Item number | 96503080 |
