Drive XQ Basic
Sample image, your configuration may differ.
Description
- MIG/MAG wire feeder for XQ Basic welding machines
- 5 favourites buttons for quick selection of frequently used parameters
- Portable, optionally using a crane
- Suitable for 300 mm wire spools and 200 mm wire spools with an adapter
- Easy transportation thanks to low weight and compact design
- Interior lighting
- Stable base construction (continuously cast aluminium) with sliding rails as standard
- A transparent protective cap keeps the welding parameters visible at all times
- Robust electronics in a dust-free area
- Protected arrangement of connections for intermediate hose packages and control cables
- Non-specialist personnel can change hose packages without tools
- Optional with integrated flow meter
- eFeed: Innovative 4-roll drive (quadruple meshing)
- Double ball bearings per axle
- Tool-free roll change, permanently secured roll fasteners
- Adjustable contact pressure for each roll pair
- Rolls colour-coded for wire diameter and material
- Equipped with 1.0–1.2 mm UNI rolls for low to high-alloy steel
Control
OW Basic-XQ
- Favourites buttons for quick selection of frequently used parameters
- Twin-knob operation: configuration of operating point using wire feed speed and welding voltage
- Locking of control unit for e.g. transport at the push of a button
- Adjusting the arc dynamics (choke effect) from soft to hard
- Rapid welding procedure selection
| Operation mode | Manual operating point adjustment |
| Welding process | MIG/MAG |
| MMA | |
| TIG | |
| Gouging | |
| Operating modes | Non-latched |
| Latched | |
| Parameters in display | Welding current |
| Wire feed speed | |
| Functions | Arc dynamics (choke effect) |
Technical data
| Duty cycle 40 °C | 600 A / 40 % |
| 470 A / 100 % | |
| Wire feed speed | 0.5 m/min - 25 m/min |
| 19.685 ipm - 984.253 ipm | |
| Factory-installed roll equipment | 1,0-1,2 mm UNI / Steel |
| Spool diameter | D200/D300 |
| Torch connection | Euro torch connector |
| Protection classification | IP23 |
| Test mark | |
| EMC class | A |
| Dimensions (L x B x H) | 660 mm x 280 mm x 380 mm |
| 26 inch x 11 inch x 15 inch | |
| Weight | 15 kg / 33.1 lbs |
| Standards | IEC 60974-1, -5 and -10 CL.A |
Documents
Accessories
Show all
Components and accessories
Welding torches
Suitable for
Show all
MIG/MAG welding machines
Protective equipment and safety
