Drive XQ HP
Description
- MIG/MAG wire feeder for XQ welding machines
- Drive XQ with HP-XQ control:
- Direct access to all the important settings options
- Quick change between innovative welding processes (without JOB switching)
- Welding sequence parameters: all parameters set using flow chart
- Product benefits:
- Portable, optionally using a crane
- Suitable for 300 mm wire spools and 200 mm wire spools with an adapter
- Easy transportation thanks to low weight and compact design
- Interior lighting
- Stable base construction (continuously cast aluminium) with sliding rails as standard
- A transparent protective cap keeps the welding parameters visible at all times
- Robust electronics in a dust-free area
- Protected arrangement of connections for intermediate hose packages and control cables
- Non-specialist personnel can change hose packages without tools
- Optional with integrated flow meter
- eFeed: Innovative 4-roll drive (quadruple meshing)
- Double ball bearings per axle
- Tool-free roll change, permanently secured roll fasteners
- Adjustable contact pressure for each roll pair
- Rolls colour-coded for wire diameter and material
- Equipped with 1.0–1.2 mm UNI rolls for low to high-alloy steel
Control
- HP-XQ control Direct access to all the important settings, including a welding flowchart for conveniently setting the welding parameters
- Quick change between innovative welding processes (without JOB switching)
- Arc length correction
- Adjusting the arc dynamics (choke effect) from soft to hard
- Locking of control unit for e.g. transport at the push of a button
- Kilowatt display for calculating the energy per unit length
- Effective arc power for calculating the energy per unit length
Operation mode | Synergic operation |
Welding process | MIG/MAG |
MIG/MAG pulse | |
TIG lift arc | |
MMA | |
coldArc® XQ | |
coldArc® puls XQ | |
rootArc® XQ | |
rootArc® puls XQ | |
forceArc® XQ | |
forceArc® puls XQ | |
wiredArc XQ | |
wiredArc puls XQ | |
Positionweld | |
superPuls | |
Availability of welding procedures may vary depending on the machine type! | |
Operating modes | Non-latched |
Latched | |
Special non-latched | |
Special latched (crater fill) | |
Resistance spot welding | |
Parameters in display | Welding current |
Wire feed speed | |
Plate thickness | |
JOB number | |
Program number | |
Error code | |
Freely adjustable programs per JOB | 16 |
Number of JOBs | 256 |
Functions | Wire burn-back |
Wire creep | |
Gas pre-flow time | |
Gas post-flow time |
Technical data
Duty cycle 40 °C | 600 A / 40 % |
470 A / 100 % | |
Wire feed speed | 0.5 m/min - 25 m/min |
19.685 ipm - 984.253 ipm | |
Factory-installed roll equipment | 1,0-1,2 mm UNI / Steel |
Spool diameter | D200/D300 |
Torch connection | Euro torch connector |
Protection classification | IP23 |
Test mark | |
EMC class | A |
Dimensions (L x B x H) | 660 mm x 280 mm x 380 mm |
26 inch x 11 inch x 15 inch | |
Weight | 15 kg / 33.1 lbs |
Standards | IEC 60974-1, -5 and -10 CL.A |
Documents
Accessories
Show all
Components and accessories
Welding torches
Suitable for
Show all
MIG/MAG welding machines
Protective equipment and safety