Drive 4X Steel puls S
Description
- MIG/MAG wire feeder for Taurus Steel puls S
- Pulsed MIG/MAG welding, MIG/MAG welding, MMA welding and gouging
- Significantly less spatter formation and therefore less finishing work thanks to the pulse function
- Product benefits:
- Portable, optionally using a crane
- Suitable for 300 mm wire spools and 200 mm wire spools with an adapter
- Easy transportation thanks to low weight and compact design
- Interior lighting
- Solidly-designed base of aluminium continuous casting
- Connection socket for electrode holder as standard
- Standard sliding rails as well as transparent cover cap for protection of the control system
- Robust electronics in a dust-free area
- Adjustable start and end-crater functions
- Protected arrangement of connections for intermediate hose packages and control cables
- Non-specialist personnel can change hose packages without tools
- eFeed: Innovative 4-roll drive (quadruple meshing)
- Double ball bearings per axle
- Tool-free roll change, permanently secured roll fasteners
- Adjustable contact pressure for each roll pair
- Rolls colour-coded for wire diameter and material
- 4-roll drive Equipped for 1.0 mm + 1.2 mm steel wires
Control
- Clear Synergic operating concept guarantees simplest setting of the welding parameters and quick finding of the operating point
- Locking of control unit for e.g. transport at the push of a button
- Adjusting the arc dynamics (choke effect) from soft to hard
Operation mode | Synergic operation |
Welding process | MIG/MAG |
MIG/MAG pulse | |
MMA | |
Gouging | |
Operating modes | Non-latched |
Latched | |
Special latched (crater fill) | |
Pulse type | Puls |
Parameters in display | Welding current |
Welding voltage | |
Wire feed speed | |
Plate thickness | |
JOB number | |
Number of JOBs | 32 |
Functions | Arc dynamics (choke effect) |
Technical data
Duty cycle 40 °C | 550 A / 60 % |
430 A / 100 % | |
Wire feed speed | 0.5 m/min - 25 m/min |
19.685 ipm - 984.253 ipm | |
Factory-installed roll equipment | 1,0-1,2 mm UNI / Steel |
Spool diameter | D200/D300 |
Torch connection | Euro torch connector |
Protection classification | IP23 |
Test mark | |
EMC class | A |
Dimensions (L x B x H) | 660 mm x 280 mm x 380 mm |
26 inch x 11 inch x 15 inch | |
Weight | 15 kg / 33.1 lbs |
Standards | IEC 60974-1, -5 and -10 CL.A |
Documents
Accessories
Show all
Components and accessories
Welding torches
Suitable for
Show all
MIG/MAG welding machines